Acme Electric®
ACME TP530193S TFMR 1PH 37.5KVA 240X480-120/240
Acme Electric®
ACME TP530193S TFMR 1PH 37.5KVA 240X480-120/240
Stanion #TP530193SACM
MFG #TP530193S
UPC #47503201503
Prop 65
Product Overview
Acme Electric® low voltage distribution transformers are designed for industrial and commercial applications. All of Acme Electric® general purpose transformers are rated for 600 volts and below. Encapsulated units are offered in ratings up to 15kVA. Ventilated units are available in ratings up to 1000 kVA and meet the requirements of U.S. DOE 10 CFR part 431 (NEMA TP1) efficiency standards.
- Attributes
- Documents
- Application
- Item Features
- Standards
BrandAcme Electric®
Connection TypeWire Lead
Country of OriginMX
Dimensions19.37 in L x 24.39 in W x 25.5 in H
Efficiency98.22 %
Enclosure TypeNEMA 2
Frequency Rating60 Hz
Housing MaterialSteel
Insulation200 deg C
Manufacturer NameHubbell
Maximum Amperage Rating100/200/400 A
Mounting TypeFloor
Phase1 ph
Power Rating37.5 kVA
Primary Voltage240/480 VAC
Secondary Voltage120/240 VAC
Temperature Rating150 deg C
TypeAir Colled/Dry
Harsh Industrial Locations, Corrosive Chemical Exposure and Waste Water Treatment Facilities Applications
- Ground studs for use with non-metallic conduit
- Quiet operation with sound levels well below NEMA standards
- Electrostatic shield for enhanced protection
- Encapsulated core and coil
- Ventilated core and coil
- Extra large wiring compartment for easier installation and cooler case temperatures
- NEMA standard busbar terminals, no special tools needed to make clearly marked connections, tap changing easily accomplished with jumpers
- Aluminum windings for increased insulation life, cooler operation, lower losses
- Noise and vibration isolating pads standard to assure quiet operation
- Large permanently legible nameplates on front
- Single phase units can be banked for 3-phase service
- All units have ground studs for use with non-metallic conduit
- 3.65% at 100% pF regulation
- 145 W no load losses
- 821 W full load
- Energy efficient
- Air cooled/dry cooling
- Four windings
- Aluminum, two primary winding, two winding secondary
- 200 A for 240 VAC, 100 A for 480 VAC primary, 400 A for 120 VAC secondary
UL 1561 File No. E12547V3|UL 542B|UL Insulation Number C3222|CSA Certified|NEC 501-2 (b) Class I Div 2|TP-1 Compliant|OSHA Approved|ANSI Specified|IEEE Certified|PROP65: Cancer and Reproductive Harm www.P65Warnings.ca.gov