LUTRON RRD-2ANF-SW MAESTRO RF FAN CONTROL F
LUTRON RRD-2ANF-SW MAESTRO RF FAN CONTROL F
Stanion #RRD2ANFSWLUT
MFG #RRD-2ANF-SW
UPC #784276040433
Product Overview
RadioRA® 2 Maestro® local controls function much like standard dimmers and switches, but can be controlled as part of a lighting control system. Local lighting controls are useful in locations where single circuits of lighting need to be dimmed or switche
- Attributes
- Documents
- Application
- Item Features
- Standards
BrandLutron®
Amperage Rating2 A
ColorSnow
Country of OriginUS
Dimensions4-11/16 in H x 2-15/16 in W x 1-11/16 in D
Environmental Conditions0 to 90% Non-Condensing Relative Humidity
FinishSatin
Manufacturer NameLutron Electronics
MountingWall
Operational Mode4-Speed/Quiet
Power Rating0.6 W
SeriesRadioRA® 2 Maestro®
Temperature Rating32 to 104 deg F
Type1-Pole Multi-Location
Voltage Rating120 VAC
Indoor Applications
- RadioRA 2 Maestro local controls include a Front Accessible Service Switch (FASS) for lamp replacement
- Requires a neutral connection
- Not for use with fans that have integrated fan speed and/or light control modules
- Controls one paddle type ceiling fan (permanent split capacitor motor) up to 2 A, not for use with shaded pole type motors
- On a single tap, fan turns ON or OFF
- Load is off and nightlight mode is enabled
- Fan speeds can be selected by pressing and holding the fan speed control rocker until the desired fan speed is reached
- System devices operate on frequencies between 431.0 MHz and 437.0 MHz
- Remote dimmers/switches are not required to be within a specific range of a repeater
- Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 recommended practice on surge voltages in low voltage AC power circuits
- Remote dimmers / switches available for multi-location control
- Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2 ESD protection
- Power failure memory should power be interrupted, the control will return to its previous state when power is restored power failure
- Dimmers and switches communicate with the system through radio frequency (RF) and must be located within 30 ft (9 m) of a repeater
- RadioRA 2 Maestro local controls function much like standard dimmers and switches, but can be controlled as part of a lighting control system
- Provides 4 quiet speeds plus off
UL Listed|CSA Certified|ANATEL Certified|COFETEL Certified|FCC Approved|NOM Certified|UL Style 20253|UL 1685|RoHS Compliant