LEV ODS15-INE EB PIR OCC SENS WL MNT NAFTA 15
LEV ODS15-INE EB PIR OCC SENS WL MNT NAFTA 15
Stanion #ODS15INELEV
MFG #ODS15-INE
UPC #078477486955
Product Overview
The ODS15 uses passive infrared (PIR) detection technology to monitor a room for occupancy through a segmented fresnel lens. This specialized lens divides the field-of-view into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion and switches the lights ON. The lights will remain On as long as there is an occupant moving through the sensor zones.
- Attributes
- Documents
- Application
- Item Features
- Standards
BrandLeviton®
ColorIvory
Country of OriginMX
Coverage2100 sq-ft
Dimensions4.06 in H x 1.75 in W x 1.83 in D
Lamp TypeFluorescent/Incandescent
Manufacturer NameLeviton
Mounting TypeWall
Power Rating1800 W at 120 VAC, 1800 VA at 120 VAC, 4000 VA at 277 VAC, 1/4 hp at 120 VAC
Response Frequency50/60 Hz
Sensor TypePIR
Temperature Rating32 to 122 deg F
Time Delay30 s to 30 min
Type1-Pole
Viewing Angle180 deg
Voltage Rating120/230/277 VAC
Commercial, Small Office, Conference Rooms, Lounges, Classrooms, Private Restrooms, Heavier Loads and Storage Areas Applications
- Fits in standard wallbox and replaces single-pole wall switch, gangable with other units, ground connection required
- Low profile design eliminates obtrusive ''scanning-device'' look
- Elegant Decora® wallplates compliment any interior for sleek aesthetics uses Decora® wallplates and coordinates with Leviton® popular line of Decora® wiring devices
- 180 deg field of view provides approximately 2100 sq-ft of coverage
- Convenient pushbutton provides manual-on/off light switching at any time
- Two dual element PIR sensors used to widen detection range
- Segmented fresnel lens provides optimum sensitivity and performance
- Designed with an extensive ''minor motion'' area where even slight body movements will be detected
- Vandal resistant PIR lens
- Horizontal field of view may be adjusted between 180 and 60 deg of arc by using integral blinders located on either side of the lens, no masking tape required
- Manual-on/auto-off mode for installations where manual-on switching is required but auto-off switching is still desired for CEC Title 24 energy savings
- Red LED indicator light flashes when sensor detects motion to verify detection is active
- Time delay in adapting mode, the time delay can be configured from 30 sec (test mode), 5, 10, 20 min, in non-adapting mode, the delay can be configured from 5, 10, 20 and 30 min
- Light sensor adjustable ambient light override ranges from approximately 20 to 5000+ lux to prevent lights from turning ON automatically during periods of ample natural light, increasing energy savings
- Light sensor enables the load hold-off feature once level has been set
- Vacancy confirmation when the time out expires and the lights turn Off a 30 sec vacancy confirmation exists to turn the lights back On
- False detection circuitry
- Presentation mode feature for slide or film presentations allows pushbuttons to turn lights Off and keep them Off while the room is occupied
- Relay switches at the zero crossing point of the AC power curve to ensure maximum contact life and compatibility with electronic ballasts
- Exclusive Leviton® HIS circuitry, specifically designed to handle today's high inrush electronic ballast loads and offer unmatched durability and service
CSA Certified|CEC Approved|FCC Approved|NAFTA Compliant|NOM Certified|UL Listed|Tittle 24 Compliant