LEV ODS15-IAI PIR OCC SNSR USA 15A
Product Overview
The ODS15 uses passive infrared (PIR) detection technology to monitor a room for occupancy through a segmented fresnel lens. This specialized lens divides the field-of-view into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion and switches the lights ON. The lights will remain ON as long as there is an occupant moving through the sensor zones.
- Attributes
- Documents
- Application
- Item Features
- Standards
BrandLeviton®
ColorIvory
Country of OriginUS
Coverage2100 sq-ft
Dimensions46 in H x 1.75 in W x 1.83 in D
Lamp TypeFluorescent
Manufacturer NameLeviton
Power Rating100/280 mW
Response Frequency50/60 Hz
Sensor TypePIR
Temperature Rating0 to 50 deg C
Time Delay30 s to 30 min
Type1-Pole Single Relay
Viewing Angle180 deg
Voltage Rating120/230/277 V AC, 120/230/277 VAC
Commercial Applications
- Fits in standard wallbox and replaces 1-pole wall switch, ground connection required, gangable with other units
- Low profile design eliminates obtrusive scanning device look, elegant Decora® wallplates complement any interior for sleek aesthetics uses Decora® wallplates and coordinates with Leviton® popular line of Decora® wiring devices
- 180 deg field of view provides approximately 2100 sq-ft of coverage
- Convenient dual pushbuttons provide manual ON/OFF light switching of each load at any time
- Two dual element PIR sensors used to widen detection range
- Segmented fresnel lens provides optimum sensitivity and performance designed with an extensive minor motion area where even slight body movements will be detected
- Vandal resistant PIR lens
- Horizontal field-of-view may be adjusted between 180 and 60 deg of arc by using integral blinders located on either side of the lens, no masking tape required
- Manual ON/auto OFF mode for installations where manual ON switching is required but auto OFF switching is still desired for CEC title T24 energy savings
- To comply with T24, red LED indicator light flashes when sensor detects motion to verify detection is active
- Time delay adjustment for delayed OFF time settings of 30 sec (for walking test), 10, 20 and 30 min, allows customized adjustments to maximize energy savings
- Light sensor enables the load hold OFF feature once level has been set
- Vacancy confirmation when the time out expires and the lights turns OFF, a 30 sec vacancy confirmation exists to turn the lights back ON
- False detection circuitry
- Presentation mode feature for slide or film presentations allows pushbuttons to turn lights OFF and keep them OFF while the room is occupied
- 1-unit can be used for 120 to 277 VAC lighting, compatible with both electronic and magnetic ballasts
- Relay switches at the zero crossing point of the AC power curve to ensure maximum contact life and compatibility with electronic ballasts
- Exclusive Leviton® high inrush stability (HIS) circuitry, specifically designed to handle today's high inrush electronic ballast loads and offer unmatched durability and service
- No neutral design is optional for retrofit applications
- Elegant Decora® wallplates compliment any interior for sleek aesthetics
- https://www.youtube.com/embed/WJQ9RT-8XOk
UL Listed|CSA 24|FCC Approve|NOM Certified