FLUKE I30 AC/DC CURRENT CLAMP
Product Overview
The i30 current clamp is based on hall effect technology for use in measurement of both DC and AC current. The i30 may be used in conjunction with multi-meters, recorders and other suitable recording instruments for accurate non-intrusive current measurement.
- Attributes
- Documents
- Application
- Item Features
- Standards
BrandFlukeĀ®
AC Current Accuracy+/-1% +/-2 mA at 25 deg C
ColorBlack/Brown/Yellow
Dimensions3/4 in Dia x 8.94 in L x 2.8 in W x 1 in H
Electrical Ratings30 A, 300 VAC/VDC
Frequency Rating20 kHz
Manufacturer NameFluke
MaterialHard Plastic
Operating Temperature0 to 50 deg C
Power Source9 VDC Alkaline Battery
TypeAC/DC
For use to measure current
- 30 mA to 30 a DC, 30 mA to 20 A AC RMS specified current range
- 5 mA to 30 a DC, 30 mA to 20 A AC RMS usable current range
- 1.4 in crest factor
- 100 mV/A output sensitivity
- +/-1 mA resolution
- >10 kOhm and <=100 pF load impedance
- +/-1% relative to center reading conductor position sensitivity
- DC to 20 kHz (-0.5 dB) frequency
- +/-0.01% of reading/deg C temperature coefficient
- 9 VDC alkaline, MN1604/PP3, 30 hours low battery indicator power supply
- 300 VAC RMS or DC working voltage
- 19 mm Dia maximum conductor
- 4 mm safety connector output connection
- Manual adjust via thumbwheel output zero
- 1.5 m L cable
- -20 to 85 deg C storage temperature range (with battery removed)
- 15 to 85% non-condensing operating humidity
- 300 VRMS, category III, pollution degree 2
BS EN 61010-031:2002|BS EN 61010-1:2001|BS EN 61010-2-032:2002|CE Marking|ECCN: EAR99|EMC/EN 61326

