TPI HF2B5103N 3.3/2.5KW 240/208V 1/3P 5100UNIT H
TPI HF2B5103N 3.3/2.5KW 240/208V 1/3P 5100UNIT H
Stanion #HF2B5103NTPI
MFG #HF2B5103N
UPC #686334645706
Prop 65
Product Overview
TPI Unit Heater, 1/3-Phase Fan Forced Standard, Series: 5100, 11.2/8.5 Btu/hr, 208/240 V AC, 13.7/11.9, 7.9/6.9 A, 3.3/2.5 kW, 400 cfm, 26 deg F, Wall Mount, 9 ft Horizontal/Vertical Mounting Height, Steel, Powder Coated, 14-15/32 in W x 6-1/2 in D x 17-3/4 in H,
- Attributes
- Documents
- Application
- Item Features
- Standards
BrandTPI
Amperage Rating13.7/11.9, 7.9/6.9 A, 13.7/11.9/7.9/6.9 A
Capacity11.2/8.5 Btu/hr
Country of OriginUS
Dimensions14-15/32 in W x 6-1/2 in D x 17-3/4 in H
FinishPowder Coated
Flow Rate400 cfm
Manufacturer NameTPI Corporation
MaterialSteel
Mounting Height9 ft Horizontal/Vertical
Mounting TypeWall
Power Rating3.3/2.5 kW
Series5100
Temperature Rating26 deg F
Type1/3-Phase Fan Forced Standard
Voltage Rating208/240 V AC, 208/240 VAC
Indoor-Commercial and Industrial Applications
- Heavy 18 ga welded steel cabinet with powder coated beige and brown two tone finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation, and maintenance
- Copper clad steel sheath element with continuously brazed stell fins formed to allow side draw through air flow
- Equipped with automatic reset type limit controls to de-energize the heater should an over-temperature situation occur
- Fan and Motor, Totally enclosed, single speed, single phase permanently lubricated, thermally protected motor with unit bearings
- Motors mounted with rubber insulators to minimize vibration and noise
ARRA Compliant|Buy American Act Compliant|cETLus Listed|ABS Approved|PROP65: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm. For more information go to www.P65Warnings.cs.gov