FLUKE FLUKE-355 AC/DC TRMS CLAMP METER 2000A

BrandFluke®

AC Current Accuracy1.5% + 5 Digits

Dimensions12 in L x 3-3/4 in W x 2 in H

Display TypeBacklit

Electrical Ratings600 VAC, 1000 VDC, 1400 A AC, 2000 A DC

Frequency Rating5 Hz to 1 kHz

Jaw Capacity2.3 in

Manufacturer NameFluke

Operating Temperature32 to 122 deg F

Power Source(6) 1.5 VDC AA NEDA 15 A/IEC LR6 Batteries

Resistance4/40/400 kOhm

Safety RatingCAT IV 600 VAC, CAT III 1000 VAC/IP42

TypeDigital

Voltage Accuracy3% Reading + 5 Digits

Other

Specification Sheet Warranty Information

Utilities, Electrical Contractors and Industrial Service Technician Applications

C43 Soft Carrying Case, 6 AA Batteries, TL224 1.5 M Silicone Rubber Test Leads, TP2 Test Probes, AC285 Alligator Clips and User Manual

Reliably handle a wide range of high current applications with 2000 A AC + DC True-RMS, 1400 A AC and 2000 A DC
Selectable low pass filter mode
Large display with backlight
Inrush current measurement
Versatile, professional and accurate
IP42 IP, (6) 1.5 V AA NEDA 15 A or IEC LR6 battery, 10/100/1000 mA resolution, -4 to 140 deg F storage temperature, 1 m drop test requirements
AC/DC current range 40 A with accuracy of (1.5 % reading + 15 digits) at 10 to 100 Hz and 10 mA resolution, 400 A with accuracy of (1.5 % reading + 5 digits) at 10 to 100 Hz and 100 mA resolution, 2000 A, 1400 A AC RMS with accuracy of (1.5 % reading + 5 digits) at 10 to 100 Hz and 1 A resolution, AC current range 40 A with accuracy of (3.5 % reading + 15 digits) at 100.1 to 1 kHz and 10 mA resolution, 400 A with accuracy of (3.5 % reading + 5 digits) at 100.1 to 1 kHz and 100 mA resolution, 2000 A, 1400 A AC RMS with accuracy of (3.5 % reading + 5 digits) at 100.1 to 1 kHz and 1 A resolution
Resistance range 400 Ohm with accuracy of (1.5% + 5 Digit) and 0.1 Ohm resolution, 4 kOhm with accuracy of (1.5% + 5 Digit) and 1 Ohm resolution, 40 kOhm with accuracy of (1.5% + 5 Digit) and 10 Ohm resolution, 400 kOhm with accuracy of (1.5% + 5 Digit) and 100 Ohm resolution
AC voltage range 4 V with accuracy of (1% reading + 10 digits) at 10 to 100 Hz and 1 mV resolution, 40 V with accuracy of (1% reading + 5 digits) at 10 to 100 Hz and 10 mV resolution, 400 V with accuracy of (1% reading + 5 digits) at 10 to 100 Hz and 100 mV resolution, 600 VAC RMS with accuracy of (1% reading + 5 digits) at 10 to 100 Hz and 10 mV resolution, 4 V with accuracy of (3% reading + 10 digits) at 100.1 to 1 kHz and 1 mV resolution, 40 V with accuracy of (3% reading + 5 digits) at 100.1 to 1 kHz and 10 mV resolution, 400 V with accuracy of (3% reading + 5 digits) at 100.1 to 1 kHz and 100 mV resolution, 600 VAC RMS with accuracy of (3% reading + 5 digits) at 100.1 to 1 kHz and 10 mV resolution
Continuity beeper On at <= 30 Ohm, Off at >= 100 Ohm
The tools of choice for high current clamp-on amp meter measurement up to 2000 A
The extra wide jaw easily clamps around large conductors, typically found in high current applications
The extra rugged design and Cat IV 600 V, Cat III 1000 V ratings add an extra element of user protection when taking high-powered measurements
Accurate peak measurements can be taken using the in-rush current mode, ideal for motors and inductive loads
The 355 also measures voltage and resistance, making this an ideal clamp meter for utilities, electrical contractors and industrial service technicians
The large 58 MM jaw capacity is suitable for large or multiple conductors
Cat IV 600 VAC, Cat III 1000 VAC rating for added user protection
In-rush current measurement captures power-on™ surge current with accuracy and repeatability
High voltage measurement of 1000 VAC plus VDC True-RMS, 600 VAC and 1000 VDC allows the user to perform multiple tests with only one tool (355 only )
Resistance to 400 kOhm coupled with a continuity beeper provide the convenience of a multimeter in a clamp meter (355 only)