APPLETON EYSF100 SEALING FITG EXP-PROOF 1
APPLETON EYSF100 SEALING FITG EXP-PROOF 1
Stanion #EYSF100APP
MFG #EYSF-100
UPC #781381330657
Product Overview
These AppletonĀ® sealing fittings minimize the passage of gases and vapors and prevent the passage of flames from one portion of a conduit system to another. They prevent pressure piling within conduit system and contain any explosion that occurs. The EYS series is used for sealing vertical conduit, and provides a large opening for damming and filling.
- Attributes
- Documents
- Application
- Item Features
- Standards
BrandAppletonĀ®
Country of OriginMX
Dimensions4-1/4 in L x 1-3/4 in W
FinishTriple Coated
Manufacturer NameEmerson Electric
MaterialMalleable Iron
SeriesEYS
Size1 in
Suitable For Use WithIMC/Threaded Rigid Metallic Conduit
TypeDust-Ignitionproof Explosionproof Raintight
For prevent passage of gases, vapors or flames from one portion of conduit system to another
- Smooth, rounded integral bushing in each hub to protect conductor insulation
- Accurately tapped, tapered NPT threads for tight, rigid joints and ground continuity
- Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub
- Large opening for damming and filling
- Restrict any explosion to the sealed off enclosure
- Required in Class I, Division 1 and 2 locations within 18 in of enclosures containing apparatus that may cause arcs, sparks or high temperatures
- Required in Class I, Division 1 and 2 locations where 2 in or larger conduit enters enclosure, fitting housing terminals, splices or taps
- Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location
- Required in Class I, Division 1 and 2 locations where two or more enclosures are connected by 36 in or less conduit, seal must be located within 18 in of either enclosure
- Required where cables which exceed rate of gas or vapor transmission permitted for seals are used in Class I, Division 2 locations
- Tapered FNPT connection
- 25% fill vertical conduit sealing fittings
- Chromate/epoxy powder coated/zinc electroplated finish
UL 1203 File No. E10444|CSA C22.2 No. 30|CSA 065181