EATON
C-H DS7-342SX055N0-N 2PH CONTROL RVSS W/ 120V
Factory Availability
EATON
C-H DS7-342SX055N0-N 2PH CONTROL RVSS W/ 120V
Factory Availability
Stanion #DS7342SX055N0NCH
MFG #DS7-342SX055N0-N
UPC #786685856384
Product Overview
EATON DS7 line of reduced voltage solid state soft start controllers is very compact, multi-functional, easy to install and easy to commission. Designed to control the acceleration and deceleration of 3-phase motors, the device is available for current ranges from 4 to 200 FLA in 4-frame sizes. It is available with 24 VDC, 24 VAC/VAC or 110/230 VAC control voltage options. A low temperature version is available with 24 VAC/VDC control voltage with operation ambient temperature minimum of -40 deg C.
- Attributes
- Documents
- Application
- Item Features
- Standards
BrandEATON
ActionStart/Stop
Amperage Rating55 A
Coil Voltage110/230 VAC
Country of OriginGB
Dimensions6.93 x 3.58 x 5.67 in
Enclosure TypeIP20
Frequency Rating50/60 Hz
Manufacturer NameEaton
Motor Power40 hp
Operating Temperature0 to 40 deg C
Overload RelaySolid-State
Phase3
SeriesDS7
Starting ModesSoft Start, Current Limit, Ramp Start, Soft Stop
Timing1 to 30 s, 0 to 30 s
TypeReduced Voltage Standard
Voltage Rating480 VAC
Electrical Assemblies, Panels and EOEMs Applications
- Run bypass mode greatly reduces internal heating created by the power dissipation across the SCRs
- The bypass relay directly connects the motor to the line and improves system efficiency by reducing internal power losses
- Less heat minimizes enclosure size and cooling requirements and maximizes the life of all devices in the enclosure
- LED displays device status and provides fault indication
- Variable ramp times and voltage control (torque control) settings provide unlimited starting configurations, allowing for maximum application flexibility
- Soft stop control suits applications where an abrupt stop of the load is not acceptable
- Soft acceleration and deceleration reduces wear on belts, gears, chains, clutches, shafts and bearings
- Minimizes the peak inrush current's stress on the power system
- Peak starting torque can be managed to diminish mechanical system wear and damage
- Auxiliary relays indicate status of the soft start controllers
- 40 hp at 480 VAC
- http://videos.eaton.com/detail/video/3753115692001/soft-starter-ds7-up-to-32-a?autoStart=true&q=DS7
CSA C22.2 No. 0-M91|CSA C22.2 No. 14-05|CE Marked|C-Tick Approved|EN 60947-4-2|IEC 60947-4-2|GB14048.6|UL 508