Russellstoll®
RUSSELLSTOLL DS6504FP00K 60A CON 4P5W MG 504 00K 3PY277V
Russellstoll®
RUSSELLSTOLL DS6504FP00K 60A CON 4P5W MG 504 00K 3PY277V
Stanion #DS6504FP00KABB
MFG #DS6504FP00K
UPC #708917176060
Product Overview
Russellstoll® Max-Gard® Female Connector, 3-Phase, 277/480Y VAC, 60 A, 60 Hz Frequency, 4 Pole, 5 Wires, NEMA 4X/6, Industrial Grade, -40 to 130 deg C, Pressure-Type Solderless Screw Terminal, Cast Aluminum, 10 in H x 5-3/8 in W Dimensions,
- Attributes
- Documents
- Application
- Item Features
- Standards
BrandRussellstoll®
Amperage Rating60 A
Country of OriginUS
Dimensions10 in H x 5-3/8 in W
Frequency Rating60 Hz
GradeIndustrial
Manufacturer NameABB, ABB - Installation Products
MaterialCast Aluminum
NEMA RatingNEMA 4X/6
Number of Poles4
Number of Wires5
Temperature Rating-40 to 130 deg C
Terminal TypePressure-Type Solderless Screw
Type3-Phase
Voltage Rating277/480Y VAC
For trade show exhibits and concerts
- With 2-control contacts
- Without adapter and box
- Waterproof construction provides environmental separation at the front of each device (they dont have to be connected together just to be called "watertight")
- All receptacles and connectors must have a rotating disk on the face of the interior, which provides live contact isolation and environmental separation
- All devices upon disconnect under load shall have provision so the arc is contained and extinguished within the insulation cavity, making it impossible to withdraw a live plug
- All devices shall be factory polarized for amperage, voltage, frequency and phase, thus providing a single voltage rating, single interface system
- The grounding of the device shall be accomplished through a separate center ground (earth) make first and break last pole on all devices for complete system grounding
- All devices shall accommodate up to four power pins plus a separate center ground pin and they shall be integral with the connector bodies (five pins total)
- All devices must have an option for two control contacts, which shall be make last and break first for use in electrical interlocks and/or control circuits
- Watertight capability shall be obtained by using a gasketed screw cap
UL Listed|CSA C22.2-182.1 File No. LR14096|OSHA Compliant|MIL-STD-105/1344|ASTM D570/D2565|NEMA PR4-1983|NEC Certified|IEC 309-1