9012GCW2
Product Overview
The 9012G pressure switches are UL listed and CSA certified as industrial control equipment. They are used to interface pneumatic or hydraulic systems with electrical control systems by opening or closing electrical contacts in response to pressure changes in the system. They have outstanding repeatability and drift performance. Their efficient design uses durable, low mass components for excellent performance under heavy duty vibration and shock conditions.
- Attributes
- Documents
- Application
- Item Features
- Standards
BrandSquare D™
Connection TypeNPT Conduit/Screw Clamp
Contact Configuration1NC-1NO
Contact Rating6 A at 120 VAC/0.27 A at 250 VDC
Country of OriginMX
Diaphragm MaterialFKM
Differential170 to 560 psi
Dimensions3.5 in W x 2.63 in D x 6.37 in H
Enclosure TypeNEMA 4/4X/13
Housing MaterialAluminum
Manufacturer NameSchneider Electric
Maximum Pressure15000 psi
Operating Cycles120 cpm
Pressure Rating90 to 2900 psi
Series9012G
Temperature Rating-10 to 185 deg F
TypeElectromechanical
Compressed Air Systems, HVAC Equipment, Chillers, Pumping Systems, Machine Tools, Stamping Presses, Automatic Grinders, Welders, Process Equipment, Molding Machines, Indoor/Outdoor and General Purpose Applications and Regulation Between 2 Thresholds
- High shock-resistance
- High set-point stability
- Internal or external range adjustment
- No drain line required
- Dual numerical range scale (psi and kPa)
- They have sealed pistons and can be used on air, water, oil or any media compatible with the actuator material
- The switches come standard with stainless steel pistons and housings, FKM diaphragms and O-ring seals and PTFE retaining rings
- NC-NO, SPDT-DB, Form Z, snap action, silver nickel contacts
- Hydraulic oil (-15 to 250 deg F), non-corrosive liquids, air, non-corrosive gas controlled fluid
- 1/4 in 18 NPTF conforming to UL 508 fluid connection
- Detection of single threshold, fixed scale
- 4 screw terminal block
- Screw clamp terminals, 22 to 12 AWG electrical connection
- Zinc plated steel flange
- Fluorocarbon (FKM) diaphragm
- Panel mounting
- Die cast aluminum alloy 380, 120 operating cycles/min (maximum)
- 1/2 in NPT conduit entrance cable entry
- Water, dust, oil and corrosion-resistant (indoor/outdoor) environmental conditions
RoHS Compliant|UL E12442 CCN NOWT|CSA Class 3218 02 LR26817|CE Marked|IEC Rated|PPROP65: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov