3M 5552 COLD SHRINK SPLICE KIT 5552 5/8 KV 4
Product Overview
3M™ cold shrink shielded splice kit 5550 series are for splicing 5 kV and 8 kV shielded, solid dielectric, power cables. Meets requirements of IEEE 404. Each kit contains all the materials (except connectors and optional ground strap) required to construct three (3) single-conductor splices on tape Shield, wire shield or UniShield® cables. Note: the kit can also be used to splice a shielded to a non-shielded 5/8 kV cable. Note: cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
- Attributes
- Documents
- Application
- Item Features
- Standards
Brand3M™
Cable TypeTape Shield/Unshielded/Wire Shield
ColorBlack
Conductor Size4/0 AWG to 500 kcmil
Country of OriginUS
Insulation Size0.725 to 1.175 in OD
Manufacturer Name3M
MaterialEPDM Rubber
Number of Conductors1
Series5550
Splice Length1 ft 9 in
Temperature Rating90 to 130 deg C
Type1-Cable Cold Shrink In-Line
Voltage Rating5/8 kV
For solid dielectric cables, indoor/outdoor location, direct burial, in-line splicing applications
- Provides splicing on tape shield, wire shield and UniShield® cables
- This kit is suitable for use on solid dielectric cables, indoor or outdoor locations and direct burial applications
- Insulator and jacket is made of EPDM for easy installation
- Optional ground strap assembly GS-2
- 4/0 AWG to 500 kcmil copper, 4/0 AWG - 400 kcmil aluminum conductor range
- 4.3 in copper max conductor length, 3.7 in aluminum max conductor length
- 1400 psi tensile strength
- 750% elongation
- 365 V/mil dielectric strength
- 250 kcmil, 350 kcmil, 4/0 AWG, 400 kcmil, 500 kcmil copper conductor sizes
- 3 splices/Kit, 1/Case
IEEE 404