3M 5513A-2-CU COLD SHRIN K QS-III SPLICE KIT 5513A-2-CU 15 KV
3M 5513A-2-CU COLD SHRIN K QS-III SPLICE KIT 5513A-2-CU 15 KV
Stanion #5513A2CU3M
MFG #7100164856
UPC #51128534823
Product Overview
The 3M™ cold shrink QS III shielded cable splices 5513A, 5514A, 5515A and 5516A series are 15 kV class in-line splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design sized to fit type MV-90 or type MV-105 cables with copper or aluminum conductor sizes ranging from 2 AWG to 1000 kcmil (35 to 500 sq-mm). The cold shrink splice body is a 1 piece molded design made of special formulated silicone rubbers, while the cold shrink jacketing is made of EPDM rubber for physical protection. Each splice manufactured is factory tested to provide reliability. The splices can be used with standard copper (Cu) or aluminum (Al/Cu) in-line compression (crimp type) connectors, and can be used for size transitions within the listed kit size range. They are designed to exceed minimum industry test standards and have a BIL rating of 150 kV (equal to a 25 kV voltage class). The 5513A, 5514A, 5515A and 5516A QS III splices meet or exceed the 15 kV voltage class rating requirements of IEEE 404. Each kit makes one splice.
- Attributes
- Documents
- Application
- Includes
- Item Features
- Standards
Brand3M™
Cable TypeLongitudinally Corrugated/Tape Shield/UniShield®/Wire Shield
ColorBlack
Conductor Size2 AWG
Connector Type10003
Country of OriginUS
Dimensions2-1/4 in Dia
Insulation Size0.64 in to 1.01 in OD
Manufacturer Name3M
MaterialEPDM/Silicone Rubber
Number of Conductors1
SeriesQS-III 5513A
Splice Length28 in
Temperature Rating105 to 140 deg C
TypeCold Shrink In-Line
Voltage Rating15 kV
Direct Burial Installations, Feeder and Distribution Circuits, In-Line Splicing and Submerged Location Applications
3M™ Cold Shrink Silicone Rubber Splice Body, (2) 3M™ Cold Shrink Adapter Tube, 3M™ Cold Shrink Jacketing Tube, (2) 3M™ Red Compound Tubes P55/R, (6) Scotch® Mastic Sealing Strips 2230, (2) Scotch® Rubber Mastic Tape 2228 Rolls, 3M™ Cable Cleaning Pad CC-3, Cable Preparation Template, Shielding Sleeve, Ground Strap, (5) 10003 Constant Force Spring Ground Connectors, (2) Copper Tape Strips and Instruction Booklet
- In-line splice for joining tape shield, wire shield, UniShield® or longitudinally corrugated shielded power cables
- Special electrode design of the kit reduces the electrical stress at a critical cable/splice interface
- Designed for feeder and distribution circuits, it transitions from shielded to neutral power cables and fits type MV-90 cables
- Silicone rubber splice body provides good high and low temperature performance and the EPDM rubber jacket offers physical protection
- Factory tested partial discharge and AC ensure reliability
- Copper conductor
- 0.4 to 1.06 in OD connector
- 4-1/2 in aluminum/copper compression length, 5 in copper compression length, 4.41 in shear bolt connector length
- 1090 psi tensile strength
- 610% elongation
- 340 to 370 V/mil dielectric strength
- 1/case
IEEE 404