3M 5303 MOTOR LEAD PIGTA IL SPLICE 5303 1 KV 1-HOLE LUG CONNE
3M 5303 MOTOR LEAD PIGTA IL SPLICE 5303 1 KV 1-HOLE LUG CONNE
Stanion #53033M
MFG #5303
UPC #54007122654
Product Overview
3M™ motor lead pigtail splicing kits 5300 series are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of pigtail (stub) connections at 1000 V and less. The splice's main component, the slip-on lug cover, is made from EPDM rubber. Mastic strips are used for the moisture seal. These kits are designed to be used with copper compression, 1-hole lugs. After being crimped onto the cables, the lugs are bolted together in a pigtail configuration, then insulated and sealed with the 3M™ motor lead splicing kit. Each kit makes three splices and contains the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3M™ Scotchlok™ copper compression lugs 30000 series or other UL listed copper lugs can be used.
- Attributes
- Documents
- Application
- Includes
- Item Features
- Standards
Brand3M™
Cable TypeShielded
ColorBlack
Conductor Size250 kcmil
Connector TypePigtail
Country of OriginUS
Insulation Size0.4 to 0.8 in OD
Manufacturer Name3M
MaterialEPDM Rubber
Number of Conductors1
Series5300
Splice Length5.3 in
Temperature Rating90 to 130 deg C
Voltage Rating0 to 1000 VAC
For splicing motor lead cables to incoming feeder cables applications
(3) Pigtail Lug Covers, (3) Locking Pins, (3) Mastic Sealing Strip, (3) Tubes of Silicone Grease and Instruction Sheet
- Fast and simple installation
- No torches or heat source required
- No special tools required to install splice
- Thick walls to resist puncture and abrasion damage
- High dielectric constant stress control included with 5/8 kV kits for shielded feeder cables for minimizing size and electrical stress
- Easy re-entry, can be used on cables with a rated operating temperature of 90 deg c and an emergency overload rating of 130 deg C, to splice (insulate and seal) motor lead connections for 1000 vac and less cables sized 16 AWG to 500 kcmil
- 5/8 kV shielded and non-shielded feeder cables sized 8 AWG to 500 KCMIL, polyethylene cable, cross-linked polyethylene cable (xlp), ethylene propylene rubber cable (epr), copper conductors
- 1-1/4 in maximum bolt length
- 1.2 in id lug cover
- 5.3 in lug cover length
- 1400 psi tensile strength
- 750% elongation
- 365 V/mil dielectric strength
- 1/case
- 0 AWG to 250 kcmil feeder cable, 2 AWG to 250 kcmil motor lead conductor size
- Designed to use with copper compression, 1-hole lugs
- Slip-on lug cover is made of durable EPDM rubber
RoHS Compliant|CSA Certified