KILLARK UGP-15231QW 15A PLUG 5-15P QUICK WIRE
KILLARK UGP-15231QW 15A PLUG 5-15P QUICK WIRE
Stanion #UGP15231QWKIL
MFG #UGP-15231QW
UPC #783936076683
Product Overview
The ACCEPTOR® UGP/UGR Plug and Receptacle system, with its unique, patented design, is interchangeable1 with other NEMA bladed type explosion proof and dust ignition proof devices. The series has been tested and classified for use with Crouse Hinds® Ark-Gard®2 and Appleton® ULine® plugs and receptacles in hazardous locations.
- Attributes
- Documents
- Application
- Item Features
- Standards
BrandKillark®
Amperage Rating15 A
ColorGray
Country of OriginCN, US
Dimensions1.69 in H x 1.69 in W x 3.36 in L
EnclosureNEMA 3/7B/7C/7D/9F/9G
Frequency Rating60 Hz
Manufacturer NameHubbell
MaterialCopper Free Aluminum
NEMA RatingNEMA 5-15P
Number of Poles2
Number of Wires3
SeriesACCEPTOR® UGP
Type1-Phase Interchangeable Blade Style
Voltage Rating125 V AC, 125 VAC
Petroleum Refineries, Chemical Plants, Wet/Damp Areas, Corrosive Environments, Petroleum Plants, Grain Elevators, Flour and Feed Mills and Indoor or Outdoor Locations Applications
- Transparent wiring entrance holes for easy conductor insertion
- Insulator fits one way
- Electrostatically applied and baked powder epoxy/polyester finish
- Plugs for use with type S, SO, ST or STO heavy duty cord
- Screws tighten from side with full sized screwdriver (slot/Phillips)
- Centered cable grip
- Copper-free aluminum (less than 4/10 of 1 Percent) alloy resists corrosion
- Proper sealing against moisture is assured
- 1-phase, raintight
- ACCEPTOR® plugs conform to NEMA configurations and can be used with standard receptacles in non-hazardous areas to maximize equipment utilization
- ACCEPTOR plugs conform to NEMA configurations, while it's "turn to engage" feature locks in plug and can be used to prevent accidental disengagement of critical equipment
- Single-piece shell for fewer parts
- Factory sealed chamber in UGR receptacle contains switch's arcing components
- Spring loaded receptacle cover closes when plug is removed to provide protection when not in use
- All external hardware is 316 stainless steel to provide low maintenance and long life
- No additional external seals are required, except in group b applications
Class I, Div 1 and 2, Group C, D, Class I, Zone 1 and 2, Group IIB, IIA, Class II, Div 1 and 2, Group F, G, Class III, Div 1 and 2|cCSAus File No. LR14667|UL File No. E91049/E53660