3M 8461 SHIELD ADAPTER K ITS
Factory Availability
Product Overview
3MTM 8459 Cold Shrink Shield Adapter Kit is designed to provide sealing and grounding applications on longitudinally corrugated, conventional tape, wire and UniShield® power cables. It is rated for 5 to 8 kV and 600 amps cables. This kit offers resistance to acids, alkalis, ozone, ultraviolet light and fungus.
- Attributes
- Documents
- Application
- Includes
- Item Features
- Standards
Brand3M™
ColorBlack
Country of OriginUS
Manufacturer Name3M
Specifications1.27 to 2.17 in OD Jacket
Suitable For Use With200 A Load Break Elbow, Up to 600 A Dead Front Modular, Cable Jacket and Semi-Conducting Insulation Shield
TypeCold Shrink
For grounding, sealing tape shielding, wire shielding, UniShield® shielded power cables when using cable accessories such as elbows, modular splices and terminations applications
(3) Mastic Sealing Strips, Cold Shrink Sealing Tube, Constant Force Spring, Preformed Ground Braid/Bleeder Wire, Strip of Scotch® 13 Semi-Conductive Tape and Instruction Sheet
- Splices tape shield, wire shield and UniShield® cables
- Adapter bleeder wire offers quick and simple installation when soldered to the ground braid
- Accommodates a wide range of cable sizes
- No torch or heat required
- Seals tight, retains its resiliency and pressure even after years of aging and exposure
- Water-resistant
- Resists fungus
- Resists acids and alkalis
- Resists ozone and ultraviolet light
- 1000 kcmil, 2/0 AWG, 250 kcmil, 3/0 AWG, 300 kcmil, 350 kcmil, 4/0 AWG, 400 kcmil, 450 kcmil, 500 kcmil, 600 kcmil, 700 kcmil, 750 kcmil, 800 kcmil and 900 kcmil conductor
- 500 to 1000 kcmil at 5/8 kV, 350 to 1000 kcmil at 15 kV, 350 to 750 kcmil at 25 kV and 2/0 AWG to 350 kcmil 35 kV conductor
ANSI C119.1|ASTM D 149-75|ASTM D412-75|ASTM D624C 73|ASTM G-21