SQD 2601AG2 DRUM SWITCH 600VAC 2HP A +OPTIONS
SQD 2601AG2 DRUM SWITCH 600VAC 2HP A +OPTIONS
Stanion #2601AG2SQD
MFG #2601AG2
UPC #785901555414
Prop 65
Product Overview
2601 reversing drum switches are designed to start and reverse motors by connecting them directly across the line. The devices can be used with squirrel cage and single phase motors designed for reversing service. Can be used with AC or DC motors. Drum switches are field convertible from maintained to momentary operation. A variety of enclosures are available. This device has a NEMA 1 general purpose enclosure. Drum switches are UL listed and CSA certified for global applications.
- Attributes
- Documents
- Application
- Item Features
- Standards
BrandSquare D™
ActionReversing
ActuatorHandle
Contact Rating2 hp at 200/230/460/575VAC, 1/4 hp at 115/230 VDC, 1-1/2 hp at 115 VAC
Country of OriginMX
EnclosureNEMA 1
Manufacturer NameSchneider Electric
MountingFlush
Number of Poles3
Power Rating2 hp, 1/4 hp, 1-1/2 hp
Series2601
TypeType AG
Voltage Rating600 VAC/250 VDC
For designed to start and reverse motors by connecting them directly across-the-line in manual reversing control applications such as machine tools and woodworking machines and similar types of equipment applications
- Screw clamp terminal connections
- Reversing drum switches are designed to start and reverse motors by connecting them directly across the line
- The devices may be used with squirrel cage motors, one phase motors designed for reversing service and series, shunt and compound DC motors
- The applications should be such that across-the-line starting of the motors is not objectionable, unless other means is provided for limiting starting current and torque
- Class 2601 drum switches are field convertible from maintained to momentary operation
- Large movable contact segments are rigidly attached to the main operating shaft
- They are fully insulated from each other and from the shaft
- Stationary contact fingers are mounted in polymeric blocks
- Both movable and stationary contacts are plated for maximum life
- Extremely accessible terminals are provided for easy wiring, contacts are not replaceable
- Type a is provided with screw type terminals and type B is provided with pressure wire connector terminals
- The operating mechanism is assembled for maintained position operation, that is when the handle is moved to the forward or reverse position, it will remain there until moved
- The mechanism can be easily converted, with no additional parts needed, to provide spring return to off operation
- This conversion is accomplished by removing the handle screw and handle, turning the shaft 180 deg and then replacing the handle and handle screw
- Both the nema type 1 and NEMA type 4 devices offer as standard a 1 piece die cast handle
- The polymeric NEMA type 1 enclosure is suitable for indoor applications when normal atmospheric conditions prevail
- The nema type 4 enclosure is suitable for applications requiring watertight and dust tight capabilities
- Two knockouts or openings for 1/2 in conduit entries are located in the bottom plate of the AG/BG types, while two 1/2 in conduit entries with hubs are provided as standard in AW/BW types
- A single captive screw holds the cover on NEMA type 1 enclosures, while three captive screws hold the cover on NEMA type 4 enclosures
UL Listed|CSA Certified|PROP65: This product can expose you to chemicals including: Antimony oxide and Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov