PANDUIT CJ588GRY MINI-COM MODULE CAT 5E U
Product Overview
Cat 5e/Class D, 8-position, UTP jack module shall terminate solid, 4-pair, 24 to 22 AWG, 100 Ohm unshielded twisted pair cable and shall not require use of a punchdown tool. UTP jack modules shall use a downward forward motion termination method to optimize performance by maintaining cable pair geometry while eliminating conductor untwist. The module base sled shall be color-coded orange to designate Cat 5e performance and shall include a universal label coded for T568A and T568B wiring schemes.
- Attributes
- Documents
- Application
- Item Features
- Standards
BrandPanduit®
ColorGreen
Country of OriginCN
Dimensions0.62 in W x 1.37 in D x 0.72 in H
Manufacturer NamePanduit
MaterialABS
Module TypeCat 5e RJ45/Mini-Com®
Mounting TypeSurface
Number of Ports1
Type8-Position 8-Wire Leadframe Unshielded
10BASE-T (Ethernet), 100BASE-T (Fast Ethernet), 1000BASE-T (Gigabit Ethernet), 155 Mbps ATM, 622 Mbps ATM, Token Ring 4/16, Voice/Data Systems and Voice Over Internet Protocol (VoIP) Applications
- Enables easy troubleshooting and eases conductor alignment during termination
- UTP jack modules snap-in and out of all Mini-Com® faceplate, modular patch panel and surface mount boxes for easy moves, adds and changes
- Controls cable bend radius for long term installed performance
- Industry standard interface provides a quick and easy plug and play connection to RJ45 patch cords and backwards compatible
- CJT-X termination tool ensures conductors are fully terminated by utilizing a smooth forward motion without impact on critical internal components for maximum reliability
- Each module is 100% factory tested for continuity
- Contacts are plated with 50 um in of gold for superior performance
- Jack module are compatible with Mini-Com® modular patch panel and faceplate
- The Mini-Com® Cat 5e UTP RJ45 leadframe jack module is designed to terminate four-pair, 24 to 22 AWG twisted pair cable
- Clear termination cap enables easy troubleshooting and eases conductor alignment during termination
- UTP jack modules snap-in and out of all Mini-Com® faceplates, modular patch panels and surface mount boxes for easy moves, adds and changes
- True strain relief controls cable bend radius for long term installed performance
- Industry standard interface provides a quick and easy plug and play connection to RJ45 patch cords, backwards compatible
- Can be clearly identified with optional labels and icons for port identification
Exceeds Channel and Component Requirements of ANSI/TIA-568-C.2 Category 5e and ISO 11801 Class D Standards at Swept Frequencies 1 to 100 MHz. Meets all Applicable ANSI/TIA-968-A Requirements, Meets Requirements of IEEE 802.3af and IEEE 802.3at for PoE Appl|ARRA Compliant|Buy American Act Compliant|RoHS Compliant|PoE Compliant|UL 1863, IEC 60603-7|CSA Approved