MERSEN FEY-11-21-BA CC F FH INLINE 2P 11-21-BA
MERSEN FEY-11-21-BA CC F FH INLINE 2P 11-21-BA
Stanion #FEY1121BAMER
MFG #FEY-11-21-BA
UPC #782001301354
Product Overview
Mersen’s complete line of single and dual pole in-line fuse holders accommodate either 1-1/2" x 13/32" (10 x 38 mm) midget or Class CC fuses. The fuse holders are designed for quick installation. Securing nuts or screws are captive thus speeding installation by reducing the need to locate and assemble loose components in the field. Three internal O-rings per pole seal the fuse holder providing a waterresistant compartment for the fuse. The captive O-rings are colored (blue for single pole and red for dual pole) for quick detection. Optional cone shaped insulator boots can be slipped on to provide a watertight seal (breakaway versions come with boots standard). Both single and dual pole versions have an optional breakaway feature which safely disconnects the load in case of a pole knockdown. Fuses remain safely encapsulated within the watertight fuse holder on the load side. Once the pole has been reinstalled the fuse holder can be easily reconnected.
- Attributes
- Documents
- Application
- Item Features
- Standards
BrandMersen
Amperage Rating30 A
ClassCC
Connection TypeCrimped
Country of OriginMX
Dimensions8.6 in L
Manufacturer NameMERSEN
MaterialPolyethylene
Mounting TypeIn-Line
Number of Phases2
Number of Poles2
SeriesFEY
Suitable For Use WithATDR, ATMR, ATQR Class CC Fuse
Temperature Rating155 deg C
TypeBreakaway
Voltage Rating600 VAC/VDC
Wire Size12 to 8 AWG, 14 to 12 AWG
Street Lighting, Parking Lot Lighting, Traffic Signaling, Sports Lighting, Boats and Marinas and Humid/Corrosive Environments
- Breakaway version quickly disconnects line side during pole knockdown in compliance with state and federal highway commission standards
- (3) O-rings per pole for watertight applications
- Colored O-rings for quick detection
- Accepts midget or class CC fuses
- Wide assortment of terminal variations
- High heat, impact resistant insulator
- Captive nut or screw for quick installations
- Polarized dual pole provides simultaneous disconnection
- Tulip fuse clip for improved contact and low losses
- Permanently installed neutral versions quickly identified by white nuts
- Environmentally friendly no-lead solder used
- Highly visible catalog number even with insulation boots installed
- Wire gauge size identified on insulation boots for quick, accurate trimming
- (1) 12 to 8 AWG solid/stranded, (2) 14 to 12 AWG solid/stranded copper crimp terminal type 11, (2) 10 AWG, (1) 6 AWG solid/stranded, (1) 4 AWG solid copper crimp terminal type 21 wire size
- 12 to 8 AWG, 14 to 12 AWG, 10 AWG, 6 AWG, 4 AWG
RoHS Compliant|UL Listed|UL Recognized|UL 4248-4 IZLT File No. E52283|CSA Certified|CSA C22.2 Class 6225 File No. 32169