LUTRON SCR-15-GFST-SW CLARO 15A TAMPER-RESISTA
LUTRON SCR-15-GFST-SW CLARO 15A TAMPER-RESISTA
Stanion #SCR15GFSTSWLUT
MFG #SCR-15-GFST-SW
UPC #784276159067
Product Overview
Lutron®, SCR-15-GFST-SW, GFCI Receptacle, Designer Style Self-Testing Tamper-Resistant, Series: Claro®, 125 VAC, 15 A, 60 Hz Frequency, -30 to 150 deg F, Back/Side Wire Terminal, Plastic, Snow, 4.69 in H x 2.94 in W x 1.47 in D Dimensions,
- Attributes
- Documents
- Item Features
- Standards
BrandLutron®
Amperage Rating15 A
ColorSnow
Country of OriginCN
Dimensions4.69 in H x 2.94 in W x 1.47 in D
Frequency Rating60 Hz
Manufacturer NameLutron Electronics
MaterialPlastic
SeriesClaro®
Temperature Rating-30 to 150 deg F
Terminal TypeBack/Side Wire
TypeDesigner Style Self-Testing Tamper-Resistant
Voltage Rating125 VAC
- Manual test, this design incorporates a full system test function, the GFCI, when manually tested, induces a simulated ground fault leakage current to the printed circuit board, this in turn causes the mechanical system to react based on the action of the solenoid, the entire mechanical and electronic GFCI system is reviewed for functionality
- Reverse wire safety feature - if wired incorrectly there will be no power to the face or to downstream receptacles for added safety
- 125V only (US style wall box)
- Receptacle face compatible with NEMA designer and Nova T® designer opening wallplates
- 15 A capacity
- Traditional testing mode by manually operating the "test and reset" buttons utilizing a supervisory circuit as specified in UL 943 section 5.15
- Satin finish
- Permanently installed internal tamper-resistant shutter mechanism capable of resisting insertion of foreign elements into the device
- Auto-sensing mode for immediate interruption for a ground fault condition for class A protection (4 to 6 mA)
- Clear visual indication of GFCI status - LED indicating lights: green LED (power to the device), red LED (trip condition/ground fault condition), flashing red LED (end of life)
- Internal back wiring clamp and guide pocket - quick and dependable termination
- Continuous self-test functionality, disconnects power to receptacle if critical components are damaged and GFCI protection is lost - providing "continuous self-testing" that initiates within 2.5 sec and is a continuous cycle every 30 sec or less
- Three provisions for providing protection, (1) continuous electronic sensing, testing and evaluation utilizing diagnostic software located on the printed circuit board
UL 498 File No. E41978|UL 943 Section 6.20 Class A|CEC Certified|OSHA Compliant|CSA File No. LR24886|NEC 406.12|NEC 517-18|UL 943/UL 498/UL 943 UL File No. E-41978 Listed|CSA File No. LR-24886, Complies to NEC|NOM Certified