Lutron® | LUTRON EC5T832JUNV1 ECOSYS BALLAST 5-INPUT T

BrandLutron®

Amperage Rating0.11/0.13/0.26 A

Ballast Factor0.85

ColorNatural White

Country of OriginMX

Dimensions9.5 in L x 2.38 in W x 1 in H

DimmableYes

Frequency Rating50/60 Hz

Lamp TypeT8 Linear/U-Bent Fluorescent

Lamp Wattage32 W

Manufacturer NameLutron Electronics

Minimum Starting Temperature50 deg F

Mounting TypeThreaded

Number of Lamps1

Power Factor0.95

SeriesEcoSystem®

Start TypeProgrammed/Rapid

Temperature Range167 deg F

Thermal ProtectionClass P

Total Harmonic Distortion<10%

Type3-Wire 5-Control J-Type Case Universal

Voltage Rating120/240/277 VAC

Wattage31/31.3/31.6 W

Other

Dims to 10% (5% for T4 ballasts)
Non-volatile memory restores all ballast settings after power failure
Low harmonic distortion throughout the entire dimming range maintains power quality
Communicates status and sensor inputs over the EcoSystem® digital link
Protected from miswires of any input power to control lead or from lamp leads to each other and ground
Also compatible with Lutron® 3 wire fluorescent controls
Integral sensor connection provides power for and responds to one occupancy sensor, one photo sensor and one personal control input (infrared receiver or wallstation)
Ballasts maintain consistent light output for differing lamp lengths
Programmed rapid start design ensures full rated lamp life while dimming and cycling
100% performance tested at factory
End of lamp life protection circuitry ensures safe operation throughout entire lamp life
Frequency of operation ensures that ballast does not interfere with infrared devices
EcoSystem® ballasts communicate via an EcoSystem® digital bus and connect directly to sensors and controls
Ultra quiet operation
Without leads
Lamps turn on to any dimmed level without flashing to full brightness
Continuous, flicker free dimming from 100 to 10%
0.26 A at 120 VAC, 0.13 A at 240 VAC, 0.11 A at 277 VAC