KILLARK LAL6030D LAL60W LED 120-277VAC AL 1LENS
KILLARK LAL6030D LAL60W LED 120-277VAC AL 1LENS
Stanion #LAL6030DKIL
MFG #LAL6030D
UPC #783936123493
Product Overview
Killark®, LAL6030D, Light Fixture, Linear, Series: LAL, 60 W Wattage, 120 to 277 V AC, 0.50 to 0.22 A, 7064 Lumens, 5000 K Color Temperature, Natural Lamp, 32.6 in L Dimensions,
- Attributes
- Documents
- Item Features
- Standards
- Application
BrandKillark®
Amperage Rating0.50 to 0.22 A
Color Temperature5000 K
Country of OriginUS
Dimensions32.6 in L
Lamp FinishNatural
Lamp TypeLED
Lumens7064 Lumens
Manufacturer NameHubbell
SeriesLAL
TypeLinear
Voltage Rating120 to 277 V AC, 120 to 277 VAC
Wattage60 W
- Standard supplemental 6KV surge protection
- Optional supplementary surge protection available 20KA/10KV (120-277 VAC), 10KA/10KV (347-480 VAC)
- LALxE models have "built-in" battery backup for 90 min emergency exit
- Shallow design minimizes profile in work areas with low ceiling heights
- Diffuse Lens Standard to minimize glare
- Slot Back Design allows multiple mounting access points across length - slots can also be used with 5/16 in or 8mm bolts and nuts
- 3 housing slots, 1 center back and 2 at 45 deg
- Variety of mounting options including swivel brackets, wall, ceiling brackets, or beam clamps
- End Caps each have 2 mounting feet built-in plus a safety strap attachment point
- Standard unit End Caps each have a single 3/4 in NPT hub
- Fixture is furnished with one 3/4 in close-up plug and two 3/4 in to 1/2 in reducers - provides out of the box 1/2 in dead-end to 3/4 in feed-through flexibility
- Metric openings are available
- Standard LALs have one wiring Access Plate for easy access to driver leads
- Many Midpower LEDs blend light to simulate fluorescent tubes
- Crisp White Light for Excellent Color Rendering - Chromaticity 5000K (CCT) approximately 70 CRI
- Energy Savings - High lumens per watt
- LED Array Life - to 212,000 maintenance free hours to 70% initial lumens
- Ambient suitability -40 deg C to 65 deg C (see tables)
- Instant On - Including after power interruption
- Solderless LED Board Connections - Vibration Resistant
NEC|CEC|IECeX|ATEX certifications|Class I, Division 2, Groups A, B, C, D Class I, Zone 2, Groups IIC, IIB, IIA Class II, Divisions 1 and 2, Groups E, F, G Class III, Divisions 1 and 2 Zone 2 Zone 21
For linear LED Luminaires are designed for installations where moisture, dirt, dust, corrosion and vibration may be present, and NEMA 3, 4X, IP66 areas where wind, water, snow or high ambients can be expected. They can be used in locations made hazardous by the presence of flammable vapors or gases or combustible dusts as defined by the NEC/CEC/IEC