Gardner Bender | Stanion

Refine Results

Search Within Brand

: In-Stock Guarantee Items Only
: Analog Multimeters (3)
Cable Splice Ground Kits (1)
Cable Splice Ground Kits (1)
Cable Strippers (1)
Cable/Wire Carts & Caddies (3)
Circuit Testers (2)
Circuit Testers (1)
Conduit Bender Hardware (1)
Conduit Bending Hand Books (1)
Conduit Bending Hand Books (1)
: +/-4 % (2)
+/-5 % (1)
: Lever (2)
: 10 A (3)
10:00 AM (1)
20 A (1)
20/10 A (2)
250 mA (2)
6 A (1)
6.3 A (1)
6:00 AM (1)
: 10 ga Mild Steel, 12 ga Stainless Steel (3)
Mild Steel, Sheet Steel and Stainless Steel (3)
: 0.134 in ID (1)
: Insulated (1)
: (2) LR-44 (1)
AAA (1)
: (2) 1.5 V AA Non-Rechargeable (1)
1.5 V AA Non-Rechargeable (2)
: 180 deg (1)
: 2 in (2)
4.9 in (1)
7 in (1)
: 10 AWG, 12 AWG, 14 AWG (2)
14 AWG, 12 AWG, 10 AWG (1)
22 to 8 AWG (1)
: AC/BX/MC/NM/UF (3)
BX/Greenfield/NM/SE (1)
Coaxial/NM/RG-59/RG-6/RG6QS/Romex® (1)
Coaxial/RG-59/RG-6/RG6QS (1)
Non-Metallic (1)
Solid/Stranded (1)
: 4/0 AWG (1)
: 1/2 to 2 in (1)
1/2 to 2 in, 1/2 to 1-1/4 in (1)
10 AWG, 12 AWG (1)
: Locking (1)
Semi-Pneumatic (1)
: 50 mOhm (2)
: Black (15)
Black/Red (1)
Blue (1)
Brass (1)
Chrome (2)
Galvanized Steel (1)
Graphite Metallic (1)
Gray (1)
Metallic Silver (1)
Natural (1)
: 12 to 10 AWG (2)
: 1 in (1)
1-1/2 in (1)
1-1/4 in (1)
1/2 in (2)
2-1/2 in (1)
3 in (2)
: 1 in (1)
1-1/4 in (2)
1/2 in (2)
1/2 to 2 in (1)
2-1/2 in (1)
: Wire Lead (1)
: SPDT (1)
SPST (2)
: CN (40)
TW (9)
US (37)
: 1-5/8 in (1)
1/2 in (2)
: 0.88 in (1)
1.34 in (1)
1.69 in (1)
: 1/2 in (1)
3/4 to 2 in (1)
: 1400 V/mil (1)
: 1 in W x 1-21/64 in H (1)
1.1 in H x 2.13 in W x 2.25 in L (1)
1/8 in OD (1)
109 mm L x 70 mm W x 33 mm H (1)
149 mm L x 97 mm W x 43 mm H (1)
2-3/8 in Dia x 1-1/8 in L (1)
2.14 in H (1)
2.22 in H (1)
4 in L (2)
42 in W x 48 in D x 40 in H (1)
: Analog (3)
LED (1)
: Import (1)
: Imperial (3)
: Hydraulic (2)
: IP20 (3)
: 32 to 104 deg F Operating, 80% Relative Humidity Max, 50% Relative Humidity above 30 deg C (3)
32 to 104 deg F Temperature, 80% Relative Humidity (1)
75 deg C Temperature (2)
: Black Oxide (4)
Galvanized (8)
Graphite Metallic (3)
Nickel Plated (2)
Oxide Coated (2)
Zinc Plated (1)
Zinc-Plated (1)
: 50/60 Hz (1)
60 Hz (4)
: 20 (1)
: Plastic (1)
: Comfortable/Non-Slip (1)
: Ratchet (1)
: 22 to 54 in (1)
: 1 in (1)
1-1/2 in (1)
1-1/4 in (1)
1/2 in (1)
2-1/2 in (1)
3 in (1)
3/4 in (1)
: Aluminum (1)
: Bulb (1)
Visual (1)
: Barrel (1)
PVC Full Insulated (1)
: 43 mm (1)
7/8 in (1)
: 2 in (1)
3 ft (1)
: 1 in (1)
1-1/4 in (1)
1/4 in (1)
2-1/8 in (1)
5/16 to 1/2 in (1)
: 1.02 in (1)
1.25 in (1)
18 in (1)
24 in (2)
25 in (1)
60 ft (1)
6500 ft (1)
8 in (2)
: 2500 lb (1)
300 lb (1)
5000 lb (1)
: 6 to 9 mA (1)
: Double Locking Teeth (1)
Double-Locking Head (1)
Locking (2)
: ECM Industries (76)
: ABS (2)
Aluminum (1)
Brass (1)
Chrome Moly Steel (2)
Chrome Molybdenum Steel (1)
Chromemoly Steel (1)
Copper (1)
HSS (3)
High Carbon Steel (1)
Metallic (2)
: PVC (1)
: 1-1/8 in (1)
1-3/8 in (1)
3/4 in (1)
: 50 to 250 VAC/VDC (1)
6 to 12 VDC (1)
600 VAC (1)
: 200 deg F (1)
: 600 VAC/220 VDC (1)
: Imperial (2)
: 10 to 1000 VAC, 2.5 to 1000 VDC, 5 to 500 mA, 1 to 10 MOhm, -8 to 62 dB, 1.5 V and 9 V, 20000 Ohms per VDC and 8000 Ohms per VAC (1)
10 to 300 VAC, 10 to 300 VDC, 0.5 to 150 mA, 1 kOhm to 1 MOhm, -20 to 52 dB (1)
10 to 500 VAC, 10 to 500 VDC, 250 mA, 1 to 100 Ohm, -20 to 56 dB, 1.5 V and 9 V (1)
: 1/4 in (1)
7/8 in (2)
: -30 deg F (1)
: Hole (1)
Threaded (2)
: 2 (3)
: 2 (1)
: 4 (1)
: 1 (1)
2 (1)
3 (1)
: 10 (1)
14 (1)
: 2 (1)
5 (1)
9 (1)
: 2 (1)
3 (1)
: 167 deg F (1)
: 20-1/2 in (1)
43 in (1)
59-1/4 in (1)
: 11-1/4 in (1)
16 in (1)
2 in (2)
2-3/4 in (1)
22 in (1)
36-3/8 in (1)
4-1/4 in (1)
: 16 in (1)
26 in (1)
31-3/8 in (1)
: Offset Nail/Sharp (1)
Self-Starting/Self-Centering (3)
Sharp (3)
: 1-1/2 hp (1)
3/4 hp (1)
690 W (1)
: (2) LR-44 Battery (1)
50 to 600 VAC (1)
: Round (1)
: 2500 lb (1)
: 46 to 96 in (1)
: 1 MOhm (1)
10 mOhm (1)
50 kOhm (1)
: CAT II 1000V (1)
CAT II 300V (1)
CAT II 500V (1)
: H2 (1)
: 1/2 in (1)
3/8 in (2)
: 3-Lobbed (3)
: 3/4 in Dia x 10-5/16 in L (1)
3/8 x 2-1/2 in (1)
: 1/2 in, 3/4 in (1)
: 1/2 to 2 in (1)
2 in OD (1)
2.5:1 Shrink Ratio, 600 VAC (1)
Hydraulic Drive (1)
Rubber Insulation (1)
Vibrant Resistant (1)
Vinyl Insulated (1)
: cULus Listed (1)
: Square Wire (1)
: 84 (1)
: 1 in L x 1/2 in W (1)
1/2 in W x 3/16 in H (2)
1/4 in W (2)
9/16 x 1-1/4 in (1)
: Insulated (1)
: 1/8 in (3)
: #8 to #10 (1)
12-14 in (1)
: Electrical (1)
: 10 ga Mild Steel, 12 ga Stainless Steel (1)
14 to 8 AWG UF Copper Wire (1)
3/4 in to 2 in Punches and Dies (1)
B2555 Electric Sidewinder® Benders (1)
Box Knockout (7)
Electrical Box (2)
Electrical Conduits and Pipes (1)
Manual or Power Fishing System (1)
Slug-Out™ Hydraulic Knockout Sets, 3-1/2 to 4 in Punches and Dies (1)
Slug-Out™ Hydraulic Knockout Sets, 3/4 to 4 in Punches and Dies (1)
: Imperial (1)
: -40 to 185 deg F (3)
0 to 100 deg C (1)
167 deg F (2)
32 to 185 deg F (1)
64 to 77 deg F (3)
: 175 lb (2)
500 lb (1)
75 lb (2)
: Screw (2)
: Crimp (1)
: 0.055 in (2)
0.07 in (2)
15 mil (1)
: 0.37 in (1)
: Ring (1)
: Kit (1)
: 1-Piece Bent Tip Heavy Duty UV-Resistant (2)
2-Conductor Contractor Length (1)
2-Speed/3-Speed (1)
2020 Edition (1)
5-Function 12-Range 13-Position (1)
6-Function 14-Range 15-Position (1)
7-Function 19-Range 20-Position (1)
90 deg (1)
Automotive (1)
Bent Tip UV-Resistant (1)
: Manual (1)
: 1000 VAC/VDC (1)
110 to 125 VAC (1)
110/115 VAC (1)
120 V (1)
125 VAC (1)
125/277 VAC (2)
300 VAC/VDC (1)
500 VAC/VDC (1)
600 V (3)
600 VAC (1)
: 12 in (1)
: Solid (1)
: 0.17 in (2)
0.35 in (2)
11-1/4 in (1)
16 in (1)
3.75 in (1)
3/4 in (1)
: 14 to 6 AWG (1)
14 to 8 AWG (1)
16/4 AWG, 12/3 AWG, 10/2 AWG (1)
22 to 14 AWG (2)
: Copper (1)