BUSS BSPD200480Y2K SPD 2 00KA STD PKG. NEMA 1 ENC
Factory Availability
BUSS BSPD200480Y2K SPD 2 00KA STD PKG. NEMA 1 ENC
Factory Availability
Stanion #BSPD200480Y2KBUS
MFG #BSPD200480Y2K
UPC #786685933849
Product Overview
The BSPD series of surge protective devices are tested by underwriters laboratory and listed to UL 1449, 3rd edition to help ensure equipment is protected with highly reliable surge protection technology. Delta and Wye system units are available in three configurations to increase application flexibility. The BSPD series is for installation external to an electrical enclosure or panelboard. Application of BSPD series units throughout a facility will help ensure that equipment is protected.
- Attributes
- Documents
- Application
- Item Features
- Standards
BrandEATON
Clamping Voltage277/480Y VAC
ClassType 2 SPD
Country of OriginUS
Dimensions14 in L x 10 in W x 7 in H
Enclosure TypeNEMA 1
Environmental Conditions-40 to 122 deg F Operating, 5 to 95% Non-Condensing Relative Humidity
Frequency Rating50/60 Hz
Indicator TypeLED/Audible Alarm
Manufacturer NameEaton
MaterialSteel
Modes of ProtectionL-G/L-N/N-G/L-L
Nominal Discharge Current20 kA
Number of Wires4+G
Peak Surge Current200 kA
Phase3
SeriesBSPD Series
Short Circuit Current Rating200 kA
Type1-Port High Capacity
Other
For many electrical applications such as service entrances, switchgear, power distribution panel and point-of-use applications
- Standard with Form C contact and EMI/RFI filter
- Green and red LEDs per phase to indicate protection status
- Green and red LEDs on Wye units to indicate protection status of the neutral-to-ground mode
- Audible alarm with silence button
- Form C contact relay
- EMI/RFI filtering providing up to 50 dB of noise attenuation from 10 kHz to 100 MHz
SCAQMD compliance,Contact Manufacturer

