Factory Availability
Product Overview
Crouse-Hinds series Arktite plugs and receptacles are used to supply power to portable electrically operated devices, such as motor generator sets, compressors, heating and cooling units, welders, conveyors, lighting systems and similar equipment. Also used where temporary power is needed, such as at trailers, building units, heavy machinery or wherever electrical loads must be quickly disconnected from power source.
- Attributes
- Documents
- Application
- Item Features
- Standards
BrandCrouse-Hinds
Amperage Rating100 A
ColorNatural
Country of OriginMX
Dimensions8-1/2 in W x 3-3/4 in H
Frequency Rating50 to 400 Hz
Horsepower75 hp
Manufacturer NameEaton
MaterialCopper-Free Aluminum
NEMA RatingNEMA 4
Number of Poles4
Number of Wires4
SeriesAPJ
Terminal TypeCrimp/Pressure/Solder
TypeGrounding Style 1 Heavy Duty Watertight Weatherproof
Voltage Rating600 V AC/250 V DC, 600 VAC/250 VDC
Indoor/Outdoor Motor Generator Set, Compressor, Heating/Cooling Unit, Welder, Conveyor and Lighting System, Industrial Facilities, Factories, Power Distribution and Control Applications
- Grounding style 1 through shell
- Circuit breaking plugs through 100 a rating may be disconnected under load, 150 to 400 a units are for service disconnect use only
- Receptacles accept only plugs of the same amperage rating, style and number of poles, making it impossible to mismate and provides for positive polarization
- Extra wide electrical spacing allows for maximum safety
- Insulator materials are the result of intensive testing, selection has been made based on highest dielectric strength, maximum mechanical and impact resistance, lowest moisture absorption and highest arc tracking resistance
- Designed to withstand rough usage and the effects of adverse environments
- ArktiteĀ® plug and receptacle interiors are interchangeable using a screwdriver, this makes it possible to feed a normally de-energized receptacle from an energized plug with usual ArktiteĀ® safety, no energized contacts are exposed
- 1 to 1.7 in Dia cable
- 2 to 1 AWG building, 2 to 2 AWG extra flex wire
- Reverse interior
UL 1682|UL 1686|CE Certified|CSA C22.2 182.1

