When working in wet environments, use Bridgeport's liquid tight 90-degree connectors to keep water out of your wiring systems when connecting liquid tight conduit to an electrical box or enclosure at a 90-degree angle. Die cast and cast zinc connectors feature a precise fit and finish for a trouble-free performance, ease of assembly and excellent corrosion resistance in harsh environments. They also provide greater installation flexibility in wet locations and are listed for use with both metallic and nonmetallic liquid tight conduit. Plus, assembling LT2 connectors is easy. Simply slide the compression nut and inner sealing ring over the conduit before threading the ferrule directly into the conduit channel. At that point, insert the conduit into the connector, tighten the compression nut to secure the conduit in place, and then join the fitting to a box knockout using the provided locknut. Once installed, NPT threads, a polyethylene gasket and internal sealing ring provide a liquid tight connection. Bridgeport zinc liquid tight 90-degree connectors offer flexible sizing and are available in trade sizes 3/8" to 4". Sizes 3/8" to 1-1/4" are crafted from die cast zinc, whereas sizes 1-1/2" to 4" are made from cast zinc. All are UL-Listed under File No. E9391, CSA Listed under File No. LR39354 and NEMA TYPE 2, 3, 3R, 4 and 12. They also meet the NEC requirements for use in wet locations and are suitable for use in Class I, Division 2; Class II, Divisions 1 & 2; and Class III, Divisions 1 & 2 per NEC 501.30 (B). Bridgeport products are manufactured for innovation, consistency and quality - providing you with everything you need to do your best work at a lower total cost. We build every product with the same goal in mind: guaranteeing a fast, professional-grade, trouble-free installation that meets or exceeds code requirements. When you need reliable fittings that keep the water out and the quality in, be sure to look for Bridgeport Orange.