Appleton® | APPLETON APPEYDM300 SEALING UNILET WITH DRAI

BrandAppleton®

Country of OriginMX

Dimensions8.13 in L x 4.13 in W

FinishTriple Coated

Manufacturer NameEmerson Electric

MaterialMalleable Iron

SeriesEYDM

Size3 in

Suitable For Use WithIMC/Threaded Rigid Metallic Conduit

TypeDust-Ignitionproof Explosionproof Raintight

Other

For prevent passage of gases, vapors or flames from one portion of conduit system to another

Removable Male Nipple

Smooth, rounded integral bushing in each hub to protect conductor insulation
Accurately tapped, tapered NPT threads for tight, rigid joints and ground continuity
Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub
Close radius type for sealing vertical conduit runs
Restrict any explosion to the sealed off enclosure
Required in Class I, Division 1 and 2 locations within 18 in of enclosures containing apparatus that may cause arcs, sparks or high temperatures
Required in Class I, Division 1 and 2 locations where 2 in or larger conduit enters enclosure, fitting housing terminals, splices or taps
Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location
Required in Class I, Division 1 and 2 locations where two or more enclosures are connected by 36 in or less conduit, seal must be located within 18 in of either enclosure
Required where cables which exceed rate of gas or vapor transmission permitted for seals are used in Class I, Division 2 locations
Tapered MNPT X tapered FNPT connection
25% fill vertical conduit drain sealing fittings
Access cover has drain valve for automatic draining of water accumulation above the seal
Chromate/epoxy powder coated/zinc electroplated finish

UL 886|UL 1203|UL File No. E10444|CSA C22.2 No. 30|CSA 065181, Class I, Groups B, C, D, Class II, Groups E, F, G, Class III

Limited